Set of Boxster S II Wheels; Front: 17" x 7" with 55mm Offset, Rear: 17" x 8.5" with 48mm Offset
Gray center caps included, 8mm spacers for front included. Tires: Toyo RA1, Front: 235/40/R17, Rear: 275/40/R17
Heat cycled several times, looks like they were used for 1-2 DE's. Ready to go for your next track event!
I had them them mounted and balanced by a guy that is the factory trainer for one of the worlds largest
manufacturers of tire equipment. He balance matched each wheel to the tire, and used the new 3M Wheel
Weight System for balance weights. He knows his stuff!! If you would like, I can deliver these wheels to
the next MSR / ECR event for you! More pix at http://picasaweb.google.com/pcarfan/BoxsterSIIWheelsTires.
$900 obo.
Contact Rob Turner at 817-296-8835 or pcarfan@gmail.com
Added 8-31-08
Grey & white Nomex racing suit. Perfect condition, never worn. Used as prop for TV commercial.
Model R511. Size 56. Make offer.
Contact Shane at 214-564-3790 or txaltmans@sbcglobal.net
Added 8-31-08
6 Sparco Nomex racing suits silvery/white with black trim. Sizes 54, 56, 58 and 62. Some brand new with
tags, others worn once in TV commercial. Make offer.
Contact Shane at 214-564-3790 or txaltmans@sbcglobal.net
Added 8-31-08
Gray in bag. Never worn. $100.
Contact Shane at 214-564-3790 or txaltmans@sbcglobal.net
Added 8-31-08
Dunlop SP Winter Sport Tires. Fronts 205/55R 17 with 9 - 10/32" tread. Rears 255/40R 17 with 8 - 9/32" tread. No plugs or patches. $125 takes them all. $150 and I will mount and balance on your rims, scratches at your risk.
Contact Carl at 817-481-8371
Added 8-8-08
16' Race car trailer. Custom storage, diamond plate tool box, lockable tire rack, fuel jug holder,
spare tire, new tires, heavy duty D rings for tie downs, additional receiver hitch for mounting
removable winch. $2500 obo.
Contact James at 214-912-6590 or james.garner@mac.com
Added 8-1-08
OEM Porsche Anodized, Professionally Restored. These factory Porsche Fuchs have zero indentations, bends and
zero curb rash. Freshly Anodized Spokes and Lips fresh out of box. Made in Germany Porsche Forged Alloy.
Part # 911.362.119 ET "9jx16" and 951.632.117 ET 23.3 "8jx16" sale $2,600
Contact Jeffrey at 214-957-4385 or wiggins.jeffrey@verizon.net
Added 8-1-08
Nice set of BBS 18" hollow turbo twist wheels. Made for widebody’s with 8.5/50" front and 11/45" rears.
Currently fitted with set of Pirelli P-Zero’s. Very slight rash that has been touched up on the edge of a
couple of the wheels. Very clean otherwise. Straight and true. Just too wide for my car so I’m selling at
a loss. Asking $1000 plus shipping. Compare at $1500 on eBay. These are the real deal, not knock offs.
More pics available.
Contact John at 214-450-7053 or jrperser@yahoo.com
Added 6-29-08
I sold my 89 turbo-look 911 years ago, but didn't sell these extra wheels with it. Racing Dynamics Rear
wheels: 9 1/2 J 17 with 255/40 ZR17 tires (almost no life left). Front wheels: 8 1/2 J 17 with 225/45 ZR17
tires ( 60% life left). $800. I would consider trade for shiny chrome wheels/tires for an '84 El Camino.
(my 16 year old son's project car).
Randy Hope 817-726-4512 or randychope@charter.com
Added 5-28-08
Gently used Eibach PRO-KIT lowering springs for 987 Porsche. Less than 1 year on car. Lowers car by 1 inch in
front and rear greatly improving looks without sacrificing ride quality. PN 7218.140. $200.
Contact John at 214-450-7053 or jrperser@yahoo.com
Added 5-28-08
21’ black, dual-axle, open car transporter
Class III trailer, rated to 5000 pounds gross weight, receiver for 2" ball
Can carry a 3500 pound car
Dual 3500 pound torsion axles, electric trailer brakes
(5) 16" aluminum 5-spoke wheels, including spare
(5) new 225/60R16 97S tires, including spare
14’6" long x 7’0" wide diamond plate steel open deck
Room for any Porsche, from 356 up to 997 Turbo
Polished aluminum diamond plate fenders, low profile for easy entry into lowered cars
Polished aluminum diamond plate, easy-stowing, hidden, reinforced ramps, 8’7" long
Locking 6’10" tire rack, room for 6 tires, plus trailer spare
Locking tool box, 64" x 22" x 17"
Polished aluminum diamond plate nose guard
3.5 HP air compressor
Electric winch
5000 Watt Generac Generator, 10 HP Tecumseh gas engine
Locking fuel jug rack, holds (4) jugs
(8) HD D-Rings
$4000.00
Contact Bob Mohan at 979-224-3298 or Robert.mohan@suddenlink.net
Added 5-21-08
993 Seats, black leather, manual fore/aft adjustment, electric height adjustment, good condition, no tears in the leather, $500 or best offer.
Please call Wayne at 214-632-7225
Added 2-27-08
Chill Factor Cool Suit System, with cooler, pump & capillary shirt. $150.
Lee Wilkins 972-503-8825 or email lwilkins44@yahoo.com
Added 2-6-08
Mid to late 80's sport seats, 944, 944 turbo, 928, 911, etc. - power, good condition, beige leather,
driver's seat has a split seam on the seat bottom and small seam on backrest, passenger seat has small
split on seam on backrest, could stand to be cleaned, have been in storage - originally out of 86/87 944 -
structurally in good shape, driver's seat could stand a recover if wanting to use for presentation,
or fine as is for track use seats. $300 OBO.
Contact Steve at 214-478-7916 or email sjankowiak@parkplacetexas.com
Added 1-9-08
Rear Hatch and Glass from a 1985-1/2 944. Glass has not separated from the metal. Also a hood in good condition (paint is peeling but no dings/dents). Make an offer for either or both.
Denny Payne 206-953-8904 or email denny@dennypayne.com
Updated 1-9-08
One set of 7" and 8" x 16" Fuchs for used for 911SC and '85 911. Make a respectable offer. Stainless steel harness bar used for mid-80's 911. $100.
Contact Shelly at brbnks@yahoo.com
Added 12-23-07
Non-metallic black with tan headline - make offer - can be seen near Mockingbird Ln & Central Expressway in Dallas
Contact Burt at 214-727-2145 or burt@zinser.com
Added 12-17-07
Adjustable Rear Drop Links for $95. For use with 78-89 911 factory swaybars. (Pelican price is $140.) Used for only
one DE event this year. I removed these after one DE because I began converting car for club racing and these
drop links won’t fit anymore. I have the off-center nut that goes with these as well. Email me if you are interested.
Contact Pat at heptig@sbcglobal.net
Added 12-09-07